Oil Seals Stop an Oil Leak

How to Stop an Oil Leak from the Oil Seal
The fluids in your vehicle are essential for proper engine functioning. There are times, however, that the fluids may leak out due to a damaged seal or gasket. Changing the oil seal on your oil filter will help to stop oil from leaking out of your vehicle. The procedure is straightforward and you will not only stop the leak, you will also have fresh oil in your engine when you are finished.
1.Purchase a new oil filter, oil seal and oil from an auto parts store. Have the year, make and model of your vehicle so you can obtain the appropriate items, or check your vehicle’s owner’s manual for the information.
2.Park your car and shut off the engine. Locate the drain plug for your vehicle. Usually it is on or near your oil pan, but every car is different. Consult your owner’s manual if you can’t find it.Oil Seals Stop an Oil Leak.
3.Put an oil drip pan under the drain plug and turn the drain plug counterclockwise with a socket wrench to remove it. Let the oil drain completely and then replace and tighten the drain plug.
4.Use an oil filter wrench to remove the oil filter by turning it counterclockwise. Flip the oil filter over and let the oil drain from it as well. After it has drained, flip the filter over and look at the old oil seal to see from where it was leaking.
5.Take a new oil filter and place a new oil seal on the top of it. Dip your finger into clean oil and rub the oil on the oil seal. This will help provide a better seal for the oil filter.
6.Position the new oil filter back into place and tighten it with the filter wrench.
7.Use a funnel to add oil to your engine through the oil filler cap. Add fluid in small amounts until the dipstick reads the appropriate level.Oil Seals Stop an Oil Leak.