Auto Spare Parts nak oil seals
Easy to use.How to Change the Front Fork Seals on a Yamaha WR 250.The
Yamaha WR 250 is a dirt bike that comes with either a two- or a
four-stroke engine. Whichever engine your bike has, the process for
changing the fork seals is the same. The seals are the plastic rings in
the center of the forks that keep the air or oil inside the fork. If the
seals are bad, the oil or air will leak out and cause the forks to
fail. Changing the seals is a fairly simple job that requires just a few
tools.Auto Spare Parts nak oil seals Easy to use.
Instructions
1 Support the WR 250 on the motorcycle stand so that the front wheel is off the ground. Loosen the clamp at the top of each fork using the correct size Allen wrench.Auto Spare Parts nak oil seals Easy to use.
2 Pull the forks from the clamps. Pry the seals off the forks using the flat-head screwdriver. Slide the seal off the fork and discard.
3 Slide the new seals onto the forks. Force the seals into position on the forks by pushing them down until they snap into place. Reattach the forks to the clamps and tighten the clamps.Auto Spare Parts nak oil seals Easy to use.
Instructions
1 Support the WR 250 on the motorcycle stand so that the front wheel is off the ground. Loosen the clamp at the top of each fork using the correct size Allen wrench.Auto Spare Parts nak oil seals Easy to use.
2 Pull the forks from the clamps. Pry the seals off the forks using the flat-head screwdriver. Slide the seal off the fork and discard.
3 Slide the new seals onto the forks. Force the seals into position on the forks by pushing them down until they snap into place. Reattach the forks to the clamps and tighten the clamps.Auto Spare Parts nak oil seals Easy to use.
No comments:
Post a Comment