There should be very little play in a
steering rack system. It should not be possible to move the rim of a 15in (380mm) diameter steering wheel more than 1/2in (13mm) without the front wheels moving.If play seems to
be greater than this, check all the other steering joints. Make sure that the
rack is properly secured by testing its clamping bolts.corteco auto oil seals Superior
quality.
Clips should be tight and in the right place.
Check the rack itself by placing yourself where you can see one of the track rods.This may involve getting under the car, which must, however, have its weight on the front wheels and the wheels pointing straight ahead. auto oil seals.Drive it on to a pair of ramps.Have a helper inside the car and chalk a mark on the steering-wheel rim to show how far it moves.Tell the helper to move the wheel very slowly, and to stop when you call out. Call when you see the track rod move.corteco auto oil seals Superior quality.If the wheel has moved more than the allowed distance, the rack needs adjustment or replacement both are garage jobs.
Also check the steering-pinion bearing for wear by grasping the steering-column shaft and trying to move it in and out and across.
Squeeze the gaiter to reveal cracks.
auto oil seals. If the splined joint to the steering shaft moves, tighten the pinch bolt. If the pinion shaft itself moves, take the car to a garage for repair.See that the gasket edge on the steering-pinion cover is not damaged and that the cover-retaining bolts are tight.You can tighten the bolts yourself; but other work, such as renewing the gasket or the pinion-shaft oil seal, should be done by a garage.corteco auto oil seals Superior quality.
Clips should be tight and in the right place.
Check the rack itself by placing yourself where you can see one of the track rods.This may involve getting under the car, which must, however, have its weight on the front wheels and the wheels pointing straight ahead. auto oil seals.Drive it on to a pair of ramps.Have a helper inside the car and chalk a mark on the steering-wheel rim to show how far it moves.Tell the helper to move the wheel very slowly, and to stop when you call out. Call when you see the track rod move.corteco auto oil seals Superior quality.If the wheel has moved more than the allowed distance, the rack needs adjustment or replacement both are garage jobs.
Also check the steering-pinion bearing for wear by grasping the steering-column shaft and trying to move it in and out and across.
Squeeze the gaiter to reveal cracks.
auto oil seals. If the splined joint to the steering shaft moves, tighten the pinch bolt. If the pinion shaft itself moves, take the car to a garage for repair.See that the gasket edge on the steering-pinion cover is not damaged and that the cover-retaining bolts are tight.You can tighten the bolts yourself; but other work, such as renewing the gasket or the pinion-shaft oil seal, should be done by a garage.corteco auto oil seals Superior quality.
No comments:
Post a Comment