Seal installation, general industrial
applications .To provide effective sealing, radial shaft seals must be
installed properly. An experienced installer with suitable tools, working in a
clean environment, is recommended to provide proper installation. heat-resistant
rubber auto oil seals Excellent
quality.The shaft counterface surface and housing bore should meet the demands
specified in the sections Shaft requirements and Housing bore requirements.rubber
sealing.
To facilitate seal installation and to achieve initial lubrication, prior to installation, SKF recommends wiping the shaft and seal with the lubricant that is going to be retained. While the outside diameter of metal-cased seals can be lightly lubricated to ease installation, the outside diameter of rubber covered seals should always be lubricated.shaft seal.
Seals with an auxiliary, contacting lip can also be filled with grease between the sealing lip and auxiliary lip to reduce frictional moment. This does not apply to silicone rubber seals and seals with hydrodynamic features, other than SKF WAVE lip designs.heat-resistant rubber auto oil seals Excellent quality.
SKF also recommends using a hydraulic press, with suitable tools, to install a seal in its housing bore. nok seal.Pressure should be applied as close as possible to the outside diameter of the seal.
Seals that are designed to sit flush with the wall of the housing bore must be installed perpendicular to the housing bore axis. viton seal.The outside diameter of the tool should be larger than the housing bore diameter.heat-resistant rubber auto oil seals Excellent quality.
To facilitate seal installation and to achieve initial lubrication, prior to installation, SKF recommends wiping the shaft and seal with the lubricant that is going to be retained. While the outside diameter of metal-cased seals can be lightly lubricated to ease installation, the outside diameter of rubber covered seals should always be lubricated.shaft seal.
Seals with an auxiliary, contacting lip can also be filled with grease between the sealing lip and auxiliary lip to reduce frictional moment. This does not apply to silicone rubber seals and seals with hydrodynamic features, other than SKF WAVE lip designs.heat-resistant rubber auto oil seals Excellent quality.
SKF also recommends using a hydraulic press, with suitable tools, to install a seal in its housing bore. nok seal.Pressure should be applied as close as possible to the outside diameter of the seal.
Seals that are designed to sit flush with the wall of the housing bore must be installed perpendicular to the housing bore axis. viton seal.The outside diameter of the tool should be larger than the housing bore diameter.heat-resistant rubber auto oil seals Excellent quality.
No comments:
Post a Comment